Filter
Top Products
5-20 Commands
• The number of dots in the vertical direction is
y
× 8.
•If
x
×
y
is out of the specified range, this command is ignored.
•The
d
indicates bit-image data. Data (
d
) specifies a bit printed
to 1 and not printed to 0.
• After a downloaded bit-image is defined, it is available until
ESC @ or ESC & is executed; the printer is reset; or the power
is turned off.
GS /
m
[Name] Print downloaded bit-image
[Format] ASCII GS /
m
Hex 1D 2F
m
Decimal 29 47
m
[Range] 0 ≤
m
≤ 3, 48 ≤
m
≤ 51
[Description] Prints a downloaded bit-image using the mode specified by
m
.
m
selects a mode from the table below:
<Paper roll>
<Slip paper>
GS :
[Name] Start/end macro definition
[Format] ASCII GS :
Hex 1D 3A
Decimal 29 58
[Description] Starts or ends macro definition.
GS B
n
[Name] Turn white/black reverse printing mode on/off
[Format] ASCII GS B
n
Hex 1D 42
n
Decimal 29 66
n
[Range] 0 ≤
n
≤ 255
[Description] Turns on or off white/black reverse printing mode.
m Mode Vertical Dot Density (DPI) Horizontal Dot Density (DPI)
0, 48
1, 49
2, 50
3, 51
Normal
Double-width
Double-height
Quadruple
180
180
90
90
180
90
180
90
m Mode Adjacent Dot Printing
Maximum Number of
Horizontal Dots
0, 48
1, 49
Normal
Double-width
Not available
Available
800
400