Filter
Top Products
5-24 Commands
•
m specifies macro executing mode.
•
When
m
= 0:
The macro executes r times continuously with interval specified by
t
.
•
When
m
= 1:
After waiting for the period specified by
t
, the PAPER OUT and SLIP
LED indicators blink and the printer waits for the FEED, FORWARD
or REVERSE button to be pressed. After the button is pressed, the
printer executes the macro once. The printer repeats the operation
r
times.
GS a
n
[Name] Enable/Disable Automatic Status Back (ASB)
[Format] ASCII GS a
n
Hex 1D 61
n
Decimal 29 97
n
[Range] 0 ≤
n
≤ 255
[Description] Enables or disables ASB and specifies the status items to include, using
n
as follows:
GS b
n
[Name] Turns smoothing mode on/off
[Format] ASCII GS b
n
Hex 1D 62
n
Decimal 29 98
n
[Range] 0 ≤
n
≤ 255
[Description] Turns smoothing mode on or off.
Bit Off/On Hex Decimal Status for ASB
0
Off 00 0 Drawer kick-out connector pin 3 status disabled.
On 01 1 Drawer kick-out connector pin 3 status enabled.
1
Off 00 0 On-line/off-line status disabled.
On 02 2 On-line/off-line status enabled.
2
Off 00 0 Error status disabled.
On 04 4 Error status enabled.
3
Off 00 0 Paper roll sensor status disabled.
On 08 8 Paper roll sensor status enabled.
4 - - - Undefined.
5
Off 00 0 Slip paper sensor status disabled.
On 20 32 Slip paper sensor status enabled.
6, 7 - - - Undefined.