Filter
Top Products
4-2 Reference Information
Receipt Paper
Note:
Printing speed may be slower, depending on the data transmission
speed and the combination of control commands.
Printing method: Thermal line printing
Dot density: 180 dpi
×
180 dpi [the number of dots per
25.4 mm (1”)]
Printing direction: Unidirectional with friction feed
Printing width: 72 mm (2.83”), 512 dot positions
Characters per line: 42 (Font A) (default)
56 (Font B)
Character spacing: 0.28 mm (.01”) (2 dots) (Font A)(default)
0.28 mm (.01”) (2 dots) (Font B)
Programmable by control command.
Printing speed -
High speed mode:
28.4 lines/second maximum
(4.23 mm (1/6”) feed, at 24V, 28° C,
density level 2)
120 mm/second maximum
(approximately 4.72”/second)
Speeds are switched automatically
depending on the voltage applied to the
printer and the head temperature of the
printer.
Printing speed -
Low power
consumption mode:
Printing speed -
Ladder bar code
printing mode:
Approximately 16.5 lines/second (4.23
mm (1/6”) feed)
Approximately 70 mm/second
(approximately 2.76”/second)
Approximately 42 mm/second
(approximately 1.7”/second)
H5po4r3.fm Page 2 Tuesday, July 14, 1998 12:33 PM