Filter
Top Products
TM-L90 User’s Manual 7
English
Note:
Be sure to close the cover completely by pushing down on the middle of the
cover.
Troubleshooting
ERROR light on or blinking
❏ Check to see that the paper roll cover is closed and check the
PAPER OUT light. Close the cover or replace the paper if necessary.
❏ If the printer has been printing a lot, the head may be hot. Wait for
the head to cool. Printing will resume automatically.
❏ If the autocutter is jammed, turn the printer off and then back on.
❏ If the paper roll cover will not open, see the section below.
❏ Turn off the printer and then turn it back on. If the light is still
blinking, call your supervisor or a service person.
Paper jam
Turn off the power and open the paper roll cover and check for a paper
jam. If there is a paper jam, remove the jammed paper and follow the
instructions in the Installing the Paper Roll section to prepare the
printer for printing.
The paper roll cover will not open
Turn on the printer and remove the cutter cover. To remove the cover,
use a tool such as a screwdriver, and insert it into one of the slots
indicated by a circle in the illustration below and push the cover