Filter
Top Products
15
English
Specifications
*1: 500 mA at maximum for one port. 2 A at maximum for total of the 5 ports (USB and Micro-USB ports).
*2: Available when the PHP function is enabled. For information on how to setup PHP environment, see TM-i Series PHP Setup
Manual. Be sure to use a micro SD card with the wear leveling function.
*3: Based on Epson operating conditions.
Item Specification
Printing method Thermal line printing
Roll paper dimensions Paper width 79.5 mm ± 0.5 mm {3.13" ± 0.02"}
Diameter 83 mm {3.27"} maximum
Inside diameter of core 12 mm {0.47"}
Outside diameter of
core
18 mm {0.71"}
Thermal paper type NTP080-80
Interface Ethernet × 1
10BASE-T/100BASE-TX
Serial × 1
D-sub 9 pin male
USB × 4
USB 2.0, Type A
5 V, 500 mA*
1
Micro-USB × 1
USB 2.0, Micro-AB
5 V, 500 mA*
1
micro SD card*
2
× 1
Drawer kick-out × 1
Power supply Dedicated AC adapter (AC adapter, RA [Model: M266A])
DC 24 V, 1.8 A/DC 5 V, 2.5 A
Dedicated AC adapter AC adapter, RA (Model: M266A)
Input: AC 100 V to AC 240 V, 50 Hz to 60 Hz, 1.8 A
Output: DC 24 V, 2.1 A/DC 5 V, 3.0 A
AC power consumption Operating*
3
230 V/50 Hz: 39.1 W
115 V/60 Hz: 39.2 W
Standby 230 V/50 Hz: 3.2 W
115 V/60 Hz: 3.1 W
Temp erature Operating 5 to 45°C {41 to 113°F}
Storage –10 to 50°C {14 to 122°F}
Humidity Operating 10 to 90 %RH
Storage 10 to 90 %RH
Overall dimensions W × D × H: 125 mm × 194 mm × 114 mm {4.92"× 7.64" × 4.49"}
Mass (excluding paper and AC adapter) Approx. 1.8 kg {3.96 lb}