Filter
Top Products
Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point
146
B Press the [Enter] button on the projector's control panel
when prompted by the screen.
The "Push Button Method" screen is displayed.
C Press the button on the access point when prompted by the
screen.
This completes the setup.
D Press the [Enter] button or the [Esc] button.
It returns to the Wireless LAN menu screen.
E Select "Setup complete" - "Yes."
This completes the setup of the connection between the projector
and the access point. Press the [Menu] button to close the configu-
ration menu.
Making a connection using the PIN Code Method
q
Before you can make a connection using the PIN Code Method, a
connection must have already been setup between the computer and the
access point.