Filter
Top Products
Replacing Consumables
120
• Never disassemble or remodel the lamp. If a remodeled or reassembled lamp is
installed into the projector and used, it could cause a fire, electric shock, or an
accident.
Warning
Wait until the lamps have cooled down sufficiently before removing the lamp cover. If
the lamp is still hot, burns or other injuries may result. It takes about one hour after
the power has been turned off for the lamp to be cool enough.
Procedure
A Press the [t] power button on the remote control or the
back of the projector to turn off the projector’s power. After
the confirmation buzzer beeps twice, disconnect the power
cable.
B Wait until the lamps have cooled down sufficiently before
removing the lamp cover on the back of the projector.
Pinch the tabs on the front of the lamp cover together to release the
lock. When the lock releases, pull the cover straight out.
C Pull up the lock lever for the lamp you want to replace and
pull the lamp straight out.
If the lamp is cracked, replace it with a new lamp, or contact Epson.
s p.114
A
Lamp 1
B
Lamp 2