Filter
Top Products
Functions for Enhancing Projection
39
Functions for Enhancing Projection
Hiding the Image Temporarily (Shutter)
You can use this when you want to focus the audience's attention on what
you are saying, or if you do not want to show details such as when you are
changing between files during presentations from a computer.
Make sure that the Shutter Button is set to Electric Shutter from
Operation in the Extended menu.
Procedure
Each time you press the buttons, the electric shutter closes or opens.
q
• When the shutter is closed and no operations are performed for about 30
minutes, the projector enters Sleep Mode and turns off automatically. If
you do not want Sleep Mode to activate, change the Shutter Timer setting
to Off from Operation in the Extended menu. s p.67
• If you press the [t] button while the shutter is closed, the shutter
automatically opens and a message requesting confirmation to turn off the
power is displayed on the screen.
• The Lamp1 and Lamp2 indicators flash green while the shutter is
activated.
• When an event that is set in Schedule is executed, the shutter is canceled.
Freezing the Image (Freeze)
When the freeze function is activated on moving images, the frozen
image continues to be projected on the screen, so you can project a
moving image one frame at a time like a still photo. Also, you can
perform operations such as changing between files during presentations
from a computer without projecting any images if the freeze function is
activated beforehand.
Procedure
Using the Remote Control Using the Control Panel
Remote Control