Escort EJ-CR-MEM Printer User Manual


 
USER GUIDE
© Escort Data Logging Systems LTD DATED: 03/07/07 PAGE 8
Printouts
Charts
Below illustrates an example (not to scale):
Ser# 9445/0123 TRIP:9
Logger Serial number & trip number
Battery OK Battery Status of Logger
Air Conditioner test Description of log
1632 Logs @ 5 mins Number of Logs & Logging interval
Timemarks every 1 hrs
Times are Sender LOCAL Time zone
1995 01/03 16:12:29 Last log time
40 0 -40 Scale Marks
} Time interval = Timemarks
I E Sensor Marks, I = internal, E = external sensor
1995 01/03 11:57:29 Date & time stamp
Lower Specification Line
Upper Specification Line
Notes:
Charts print one dot pixel per log.
Scaling range is as per the graphing zoom setups which include options to auto range in
relation to upper, lower specification and increment values or just full scale and can be
set using the ESCORT user software.
Times are Sender local.
Frequency of Date & Time stamp & Timemarks are selected according to the logging
interval.
0 Deg C (32ºF) dashed line can also be configured to appear.
Sensor Marks do not appear for loggers that only have one sensor.
If, during printing, the paper runs out, the chart print indicator will flash rapidly and beep
and printing will pause. The user can either install a new roll of paper and push the print
button to resume printing or press the CANCEL
key to abort printing.
In case the battery voltage drops to an unacceptable level during printing, the chart print
indicator will flash rapidly and beep and printing will pause. The user can either plug in
external power and push the print button to resume printing or press the CANCEL
key to abort printing.