Filter
Top Products
1 LRP2000 Passive Reader/Writer
1
Introduction
1.1 Introduction
Escort Memory Systems' passive read/write system is a complete family of field-proven read/write Radio-
Frequency Identification (RFID) products. The system consists of RFID tags, reader/writers, antennas,
controllers, bus interfaces, and ancillary equipment. Tags can be attached to a product or its carrier, and
act as an electronic identifier, job sheet, portable database, or manifest. Tags are read and updated
through any non-conductive material while moving or standing still via an Escort Memory Systems Reader/
Writer.
Escort Memory Systems' LRP-Series long-range passive RFID system is the latest in our line of high
performance, industrial RFID equipment. The passive design of the LRP read/write system uses the RF
field from the antenna to power the tag, eliminating the need for tag batteries. The LRP passive read/write
system is designed to provide cost-effective RFID data collection and control solutions to automation, item-
level tracking, and material handling applications.
The LRP system uses the internationally recognized ISM frequency of 13.56 MHZ to power the tag and
establish a radio link to transfer the information. The LRP2000 is specifically designed to work with LRP-
Series passive tags, which provide 48 bytes of reprogrammable memory, and LRP-SISO-15693 compliant
tags, which provide up to 8K bytes of reprogrammable memory.
NOTE: Published performance specifications are based on Philips ICODE SLi tags.
1.2 Unpacking and Inspection
Unpack the LRP2000 and documentation. Retain the original shipping carton and packing material, in case
any items need to be returned. Inspect each item carefully for evidence of damage. If any item appears to
be damaged, notify your distributor immediately.
The LRP2000 is delivered with the following components:
• LRP2000 Controller
• LRP2000 Antenna
• LRP2000 Operator's Manual on CD
• CBL-1475 controller-to-antenna cable assembly
The following user-supplied components are required for configuring a complete system:
• A host computer with RS232 serial interface for configuration
• A host computer with RS232, RS422, or Ethernet interface for operation (The Ethernet interface is
available as an option on the LRP2000)
• AC power supply with 120VAC, 60 Hz or 230VAC, 50 Hz