ETA Systems PD11LP Power Supply User Manual


 
PD11P, PD11VP, PD11LP, PD11LVP Features:
• Light Switch (PD11LP/LVP/LVSP) activates rack illumination; choice of HI or LOW intensity
• Light Tubes (PD11LP/LVP/LVSP) illuminates up to 25 rack spaces
• 4 dual 20 amp U-grounded switched outlets per unit
• 1 dual 15 amp U-grounded "always on" and protected outlet
• Digital Voltmeter Readout (PD11VP/LVP/LVSP) displays incoming line voltage
• Resettable 20 amp thermal circuit breaker; 15 amp for front panel outlet
• Lighted Outlet Power Switch activates protection and filtration to all switch outlets and front panel outlet
• 12-gauge, 3-prong, 10-foot, 20-amp power cord. Requires 20 amp circuit and receptacle outlet
• Protected "always on" 15 amp AC power outlet on the front panel
• Total unit 20 amp and 15 amp outlet circuit breakers located on front panel
• Three-stage spike and surge protection
• Two-stage EMI/RFI filtration
• Ground and AC line fault check
• One rack space high
• One year limited warranty
PD11LVSP Features:
• Microprocessor monitored sequential power distribution system
• Four power up/down steps or stages of distributed and conditioned power
• Four pre-set power up/down intervals of 1, 5, 10 or 30 seconds
• Optional manual settings for up to 240 seconds between intervals
• One dual 120 amp U-grounded outlet per stage
• One dual 20 amp "always on" U-grounded outlet
• Full 20 amps, 2400 watts capacity per unit
• 12-gauge, 3-prong, 10-foot, 20-amp power cord. Requires 20 amp circuit and receptacle outlet
• Protected "always on" 15 amp AC power outlet on the front panel
• Total unit 20 amp and 15 amp outlet circuit breakers located on front panel
• Three-stage spike and surge protection
• Two-stage EMI/RFI filtration
• Ground and AC line fault check
• One rack space high
• One year limited warranty
Other Features:
• Remote control operation
• The remote feature is accessed externally through a 3-wire remote block
PD11LVSP/LVP/LP/VP/P Specifications:
Dimensions 19" L x 10" D x 1
3
/
4
" H
Weight 10 lbs.
Quality Finish
Black powder coat chassis, black anodized aluminum front panel
Electrical 120V, 50/60 Hz, single phase
Max. amps 20/unit
Max. watts 2400/unit
Max. front outlet 15 amps
Spike/surge protection Line to neutral, neutral to ground, line to ground
Clamping level 200V peak
Response time 1 nanosecond
Max. surge voltage 6000V
Max. surge current 23,000 amps (PD11LVSP/LVP/VP/LP/P)
Max. spike energy 630 joules total
Noise attenuation Transverse > 20 dB, 1.5 kHz to 200 MHz
Certification ETL listed