Filter
Top Products
109
Solving Problems | 109
NO CARTRIDGE
INSTALL INK CARTRIDGE
Ink cartridge(s) not installed, or
an incorrect cartridge is
installed.
Install ink cartridge(s); see page 88. Do not
reinstall the incorrect cartridge.
NO MAINTENANCE TANK
INSTALL THE RIGHT SIDE
MAINTENANCE TANK
Maintenance tank is not
installed.
Make sure the maintenance tank is fully
inserted.
NOT ENOUGH EMPTY
SPACE
REPLACE THE RIGHT SIDE
MAINTENANCE TANK
The maintenance tank is too
full for head cleaning.
Replace the maintenance tank; see page 97.
NOZZLE CLOG DETECTED
NOT ENOUGH EMPTY
SPACE IN MAINT TANK
CONTINUE CLEANING?
Not enough space in the
maintenance tank to finish
head cleaning.
Select Yes and replace the maintenance
tank; see page 97.
NOZZLE CLOG DETECTED
NOT ENOUGH INK
CONTINUE CLEANING?
Not enough ink for head
cleaning.
Replace the cartridge(s) before cleaning; see
page 88.
PAPER CUT ERROR
REMOVE UNCUT PAPER
Roll paper was not cut
correctly.
Press the button and open the front
cover. Remove the uncut paper.
The cutter may be blunt or
incorrectly installed.
Reinstall or replace the cutter if necessary;
see page 94.
PAPER EJECT ERROR
REMOVE PAPER FROM
PRINTER
Roll paper is used with the cut
sheet setting.
Press the button and remove the paper.
PAPER ERROR
LOAD PAPER CORRECTLY
Paper is not loaded correctly. Press the button, then reload paper
correctly.
PAPER JAM
REMOVE PAPER
Paper has jammed in the
printer.
Press the button and remove the
jammed paper; see page 117 for more
information.
PAPER LOW The paper roll is almost used
up.
Replace the roll.
Message
(in alphabetical order)
Explanation Response