Filter
Top Products
nForce 750i SLI Motherboard
Integrated Peripherals Menu
Select Integrated Peripherals from the CMOS Setup Utility menu and press Enter to display the
Integrated Peripherals menu.
Phoenix – AwardBIOS CMOS Setup Utility
Integrated Peripherals
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7:Defaults
Main Level
Item Help
IDE Function Setup [Press Enter]
RAID Cog [Press Enter]
OnChip USB [V1.1+V2.0]
USB Keyboard/Storage Support [Enabled]
USB Mouse Support [Disabled]
USB Park Mode
[Enabled]
USB TD Reads [ISO Queue]
USB Periodic Data Reads [ISO Queue]
USB Asyn Data Reads [non-ISO Queue]
HD Audio [Auto]
MAC Lan [Auto]
MAC Media Interface
[Pin Strap]
IEEE1394 controller [Auto]
IDE HDD Black Mode [Enabled]
Onboard FDC Controller [Enabled]
Onbaord Serial Port 1 [3F8/IRQ4]
IDE Function Setup
Press Enter to display the IDE Function Setup menu.
OnChip IDE Channel0 [Enabled]
Primary Master PIO [Auto]
Primary Slave PIO [Auto]
Primary Master UDMA [Auto]
Primary Slave UDMA
[Auto]
IDE DMA transfer access [Enabled]
Serial-ATA Controller [All Enabled]
IDE Prefetch Mode [Enabled]
OnChip IDE Channel0
Use this function to enable or disable the onchip IDE Channel0. When disabled, the Primary
Master/Slave functions are changed to Auto and cannot be changed.
Primary Master/Slave PIO
When OnChip IDE Channel0 is set to [Enabled], you can select a mode for the primary Master
and Slave PIO. Select from Auto, or Mode 1 through Mode 4.
Primary Master/Slave UDMA
When OnChip IDE Channel0 is set to [Enabled], you can disable the primary Master and Slave
UDMA or set it to [Auto].