EVGA
Power Management Setup
Select Power Management Setup from the CMOS Setup Utility menu and press Enter to display
the Power Management Setup menu.
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7:Defaults
Main Level
Item Help
ACPI function [Enabled]
APCI Suspend Type [S1&S3]
Power Management [User Define]
Video Off Mehtod
[DPMS Support]
HDD Power Down [Disabled]
Soft-Off by PBTN [Instant-Off]
WOL(PME#) From Soft-Off [Disabled]
WOR(RI#) From Soft-Off [Disabled]
Power-on by Alarm [Disabled]
x Day of Month Alarm
0
x Time (hh:mm:ss) Alarm 0 : 0 : 0
HPET Support [Enabled]
POWER ON Function [BUTTON ONLY]
x KB Power ON Password Enter
x Hot Key Power On
Ctrl-F1
PWRON After PWR-Fail [Former-Sts]
ACPI Function
This function on the Power Management Setup menu allows you to enable or disable the ACPI
function.
ACPI Suspend Type
This function on the Power Management Setup menu allows you to select an ACPI Suspend
Type. Types to select from are [S1&S3], [S1(POS)], and [S3(STR)].
Power Management
Use this to select your Power Management selection. The default is User dene.
Max. saving: Maximum power savings. Inactivity period is 1 minute in each mode.
Min. saving: Minimum power savings. Inactivity period is 1 hour in each mode.
User dene: Allows user to dene PM Timers parameters to control power saving mode.
HDD Power Down
Powers down the hard disk drive after a preset period of system inactivity.
The options are Disabled, 1min ~ 15min.
Soft-Off by PBNT
This function on the Power Management Setup menu allows you to set Soft-Off by PBNT to
[Instant-Off] or [Delay 4 Sec].