Filter
Top Products
EVGA Corporation 2900 Saturn St. Suite B, Brea, CA 92821
Phone: 888 / 881-EVGA - 714 / 528-4500 - Fax: 714 / 528-4501
Page 24
Serial-ATA Port connector: SATA1 / SATA2 / SATA3/ SATA4
This connector support the provided Serial ATA IDE hard disk cable to
connecting the motherboard and serial ATA hard disk. The motherboard will
support both SATA 150 and 300 standards.
SLI Select Mode Jumpers: JP2, JP3, JP4, JP5, JP6, JP7, JP8
These jumpers determine if SLI is enabled or not on the motherboard. If the
jumpers are in the 1-2 position, then SLI is disabled, and you should only use
your video card in the BLUE PCI-Express (PE2) slot at 16X. If the jumpers are
set to 2-3, then SLI is enabled and you can use two video cards in SLI mode in
the two YELLOW PCI-Express (PE1 and PE3) slots at 8X speed.
Please see the attached diagrams for more detailed information on the jumper
locations and settings.
Serial-ATA Port Connector
SATA4
SATA3
SATA2
SATA1