Filter
Top Products
EVGA Corporation 2900 Saturn St. Suite B, Brea, CA 92821
Phone: 888 / 881-EVGA - 714 / 528-4500 - Fax: 714 / 528-4501
Page 26
Speaker connector: SPEAK
This 4-pin connector connects to the case-mounted speaker. See the figure
below.
Power LED: PWR LED
The Power LED is light on while the system power is on. Connect the Power
LED from the system case to this pin.
IDE Activity LED: HD LED
This connector connects to the hard disk activity indicator light on the case.
Reset Switch : RESET
This 2-pin connector connects to the case-mounted reset switch for rebooting
your computer without having to turn off your power switch. This is a preferred
method of rebooting in order to prolong the life of the system’s power supply.
See the figure below.
Power Switch: PWR BTN
This 2-pin connector connects to the case-mounted power switch to power ON/
OFF the system.
System Case Connections
HDLED
RESET
VCC5
GND
VCC5
PWR LED
PWRBTN
PWRBTN
PWRLED
HDDLE
RSTSW
NC
GND
JW FP
Pin 1
SPEAK
SPKR
GND
NC
VCC5
Pin 1
PWRLED
Pin 1