EVGA 132-YW-E178 Computer Hardware User Manual


 
EVGA 39
OnChip IDE Channel0 [Disabled]
x Primary Master PIO Auto
x Primary Slave PIO Auto
x Primary Master UDMA Auto
x Primary Slave UDMA Auto
IDE DMA transfer access [Enabled]
Serial-ATA Controller [All Enabled]
IDE Prefetch Mode [Enabled]
IDE Function Setup
Press Enter to display the IDE Function Setup menu.
OnChip IDE Channel0
Use this function to enable or
disable the onchip IDE
Channel0. When disabled, the
Primary Master/Slave functions
are changed to
Auto and cannot
be changed.
Primary Master/Slave PIO
When
OnChip IDE Channel0
is set to
[Enabled], you can select a mode for the primary Master and Slave PIO. Select
from
Auto, or Mode 1 through Mode 4.
Primary Master/Slave UDMA
When
OnChip IDE Channel0 is set to [Enabled], you can disable the primary Master
and Slave UDMA or set it to
[Auto].
IDE DMA transfer access
Use this function to enable or disable IDE DMA transfer access.
Serial-ATA Controller
This function allows you to enable specific SATA controllers, enable all controllers, or
disable all controllers. The options available are
[SATA-0], [SATA-0+1], [Enable
All]
, and [Disabled].
IDE Prefetch Mode
Use this function to enable or disable the
IDE Prefetch mode.
OnChip IDE Channel0 [Enabled]
Primary Master PIO [Auto]
Primary Slave PIO [Auto]
Primary Master UDMA [Auto]
Primary Slave UDMA [Auto]
IDE DMA transfer access [Enabled]
Serial-ATA Controller [All Enabled]
IDE Prefetch Mode [Enabled]