Filter
Top Products
Hardware Installation
Note: Make sure the CPU is fully seated and level in the
socket.
7. Close the load plate over the CPU and press down
while you close and engage the socket lever.
Installing the CPU Fan
There are many different fan types that can be used with this motherboard.
Follow the instruction that came with you fan assembly. Be sure that the fan
orientation is correct for your chassis type and your fan assembly.
Installing Memory DIMMs
Your new motherboard has four 1.8V 240-pin slots for DDR2 memory. These
slots support 256 MB, 512 MB, 1 GB, and 2 GB DDR2 memory modules. They
also support dual channel DDR2 memory technology up to 10.7GB/s. There
must be at least one memory bank populated to ensure normal operation. Use
the following the recommendations for installing memory. (See Figure 1 on
page 7 for the location of the memory slots.)
One DIMM: Install into slot 0. You can install the DIMM into any slot,
however, slot 0 is preferred.
Two DIMMs: Install into either slots 0 and 1 or 2 and 3. The idea is to not
have the DIMMs in adjacent slots.
Four DIMMS: Install into slots 0, 1, 2, and 3.
DIMM Slot 0
DIMM Slot 2
DIMM Slot 1
DIMM Slot 3
CPU side
Card-ed
g
e