Filter
Top Products
EVGA 26
Enter BIOS Setup
The BIOS is the communication bridge between hardware and software. Correctly setting the
BIOS parameters is critical when maintaining optimal system performance.
Use the following procedure to verify/change BIOS settings.
1. Power on the computer.
2. Press the Del key when the following message briefly displays at the bottom of the
screen during the Power On Self Test (POST).
Press F1 to continue, DEL to enter Setup.
Pressing Del takes you to the Phoenix-Award BIOS CMOS Setup Utility.
It is strongly recommended that you do not change the default BIOS settings. Changing
some settings could damage your computer.
Main Menu
The main menu allows you to select from the list of setup functions and two exit choices. Use
the
Page Up and Page Down keys to scroll through the options or press Enter to display the
associated submenu. Use the arrow keys to position the selector in the option you choose.
To go back to the previous menu, press
Esc.
Note that on the BIOS screens all data in white is for information only, data in yellow is
changeable, data in blue is non-changeable, and data in a
red box is highlighted for selection.