Filter
Top Products
EVGA 32
Halt On
All Errors ..... [ ]
No Errors ..... [ ]
All , But Keyboard ..... [ ]
All , But Diskette ..... [ ]
All , But Disk/Key ..... [ ]
:Move ENTER:Accept ESC:Abort
Base Memory 640K
Extended Memory 1047552K
Total Memory 1048576K
Halt On
Halt On determines whether or not the computer stops if an error is detected during power
on. Use the
Page Up and Page Down keys to scroll through the options or press Enter to
display the
Halt On sub-menu. Use the arrow keys to position the selector in the option
you choose. Press
Enter to accept the changes and return to the Standard CMOS Features
menu.
All Errors
Whenever the BIOS detects a nonfatal error; the
system stops and prompts you.
No Errors
S
ystem boot does not stop for any detected errors.
All, But Keyboard
System boot does not stop for keyboard errors,
but does stop for all other errors.
All, But Diskette
The system boot does not stop for a diskette error
but will stop for all other errors.
All, But Disk/Key
The system boot does not stop for a keyboard or disk error, but will stop for all other
errors.
Memory
These settings are display-only values that are determined by the BIOS POST (Power-On Self
Test).
Base Memory
BIOS POST determines the amount
of base (or conventional) memory installed in the system.
Extended Memory
BIOS determines how much extended memory is present during the POST.
Total Memory
This value represents the total memory of the system.
Drive A [1.44, 3.5 in.]
Halt On [All , But Keyboard]
Press ENTER to display sub-menu