Filter
Top Products
EVGA 28
The following items on the CMOS Setup Utility main menu are commands rather than
submenus:
Load Fail Safe Defaults
Load default system settings.
Load Optimized Defaults
Loads optimized system settings.
Set Supervisor Password
Use this command to set, change, and disable the password used to access the BIOS menu.
Set User Password
Use this command to set, change, and disable the password used to access the BIOS menu.
Save & Exit Setup
Use this command to save settings to CMOS and exit setup.
Exit Without Saving
Use this command to abandon all setting changes and exit setup.
SLI-Ready Memory is a status indicator displayed at the bottom of the BIOS screen. The
three status indicators are:
Enabled: SLI-Ready memory is detected and enabled.
Disabled: SLI-Ready memory is detected but disabled.
Not Detected: SLI-Ready memory is not detected.
Standard CMOS Features Menu
The Standard CMOS Features menu is used to configure the standard CMOS information, such as the
date, time, HDD model, and so on. Use the
Page Up and Page Down keys to scroll through the
options or press
Enter to display the sub-menu. Use the arrow keys to position the selector in the
option you choose. To go back to the previous menu, press
Esc.