Filter
Top Products
INSTALLATION
- 4 -
Make sure to match the cable connector=s color with the connector on the card. The Modem connector is keyed, and it can not be inserted to the Ethernet connector accidently.
5. Insert the LAN interface cable with RJ-45 connector into the LAN port (White connector). Push in the connector firmly.
Make sure to match the cable connector=s color with the connector on the card. The Ethernet connector is keyed, and it can not be inserted to the Modem connector accidently.
6. You are now ready to install the ThinCom=s Ethernet and Modem device driver.
Please follow the Software Installation Guide procedures.
SOFTWARE INSTALLATION GUIDE for DOS/Windows 3.XX
Install the ThinCom==s driver with PC Card device driver
C Most of the notebook computer manufacturers supply the device driver program to operate the PC Card slot on their computers. The ThinCom=s driver work with the PC Card (Socket Service and Card
Service) device driver compliant to the PCMCIA 2.1 or later specification. Check the table on the APPENDIX A for the name of some widely used device drivers.
C A minimum of 8K block of memory in the UMB (Upper Memory Block) should be available. In order to initialize and access the ThinCom card such a memory block exclusion is requied. In most case the
PC Card device driver installation program will set the option in the EMM386.exe of the C:\config.sys file. The statement may look like this: (The actul setting for your computer may be different)