Filter
Top Products
WM-4T1i Module Installation and User Guide 3-7
PPP/MLPPP Configuration Examples
have the same T1 and PPP configurations. If you change the configuration for a single
port, the change will affect the entire group.
Figure 3-1: BCP multilink example
config default delete ports 4:1-4:3
create vlan alpha
config alpha tag 1001
create multilink bcp_example
config ports 4:1-4:3 t1 clocksource internal
config bcp_example add ports 4:1-4:3 tag
config alpha add multilink bcp_example
enable bcp_example
Configuring a Routed PPP/MLPPP Link Example
The following example shows how to configure a IPCP-encapsulated multilink group.
The VLAN that contains the IPCP-encapsulated multilink group cannot contain any
other ports.
XM_007
VLAN alpha
tag = 1001
Multilink bcp_example
encapsulation = BCP
PPP
PPP
PPP
T1 port 4:1
T1 port 4:2
T1 port 4:3
To
switch
#2
Switch #1