Extron electronic 200, 300C, 300S, 600, 800 Network Card User Manual


 
Cable Cubby
®
Products • Reference Information
Reference Information
Cable Cubby
®
Products • Reference Information
A-2 A-3
Specifi cations
General
Rack mount .................................... No, but furniture mountable
Enclosure type .............................. Metal
Enclosure dimensions
C Use the appropriate metal Extron routing template or refer to
the surface cutout dimensions here before cutting a hole in the
furniture or other surface. Pay special attention to the direction
the unit will face; the unit’s AAP and connector access side
is underlined. Extron is not responsible for miscut mounting
holes.
N
Architectural Adapter Plates (AAPs) are shown in the diagrams
that follow and in photographs as examples only. AAPs are
optional accessories for the Cable Cubby products. AAPs and
cables must be ordered separately.
Cable Cubby 200
H
W
D
Cable Cubby 200
Top plate (outer rim) .................... 8.000" W x 4.394" D
(20.32 cm W x 11.16 cm D)
Surface cutout (inside rim) ......... 7.185 ±0.0325" W x 3.155 ±0.0325" D
(18.25 ±0.083 cm W x 8.01 ±0.083 cm D)
Box (under surface) ..................... 4.000" H x 7.120" W (front/rear of
unit) x 2.974" D
(10.16 cm H x 18.08 cm W x 7.55 cm D)
Cable Cubby 300C
H
W
D
Cable Cubby 300S
H
W
D
Cable Cubby 300S
Top plate (outer rim) .................... 5.130" W x 6.470" D
(13.0 cm W x 16.4 cm D)
Surface cutout (inside rim) ........ 4.625 ±0.0325" W x 5.970 ±0.0325" D
(11.75 ±0.083 cm W x 15.16 ±0.083 cm D)
Box (under surface) ..................... 6.410" H x 4.320" W (front/rear of
unit) x 4.750" D without clamps
(16.28 cm H x 10.97 cm W x 12.07 cm D)
without clamps
6.410" H x 6.57" W x 4.750" D with
clamps
(16.28 cm H x 16.68 cm W x 12.07 cm D
with clamps
Cable Cubby 300C
Top plate (outer rim) ................... 6.500" (16.51 cm) diameter circle
Surface cutout (inside rim) ......... 6.000 ±0.0325"
(15.24 ±0.083 cm) diameter circle
Box (under surface) ..................... 6.410" H x 4.320" W (front/rear of
unit) x 4.750" D without clamps
(16.28 cm H x 10.97 cm W x 12.07 cm D)
without clamps
6.410" H x 6.57" W x 4.750" D with
clamps
(16.28 cm H x 16.68 cm W x 12.07 cm D)
with clamps
d