Filter
Top Products
18 DMS 1600, DMS 2000, DMS 3200, DMS 3600 • Remote Control 19DMS 1600, DMS 2000, DMS 3200, DMS 3600 • Remote Control
Command ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Channel mute commands
Channel mute
X@*1B VmtX@*1]
Mute output
X@
(no signal is output).
Channel unmute
X@*0B VmtX@*0]
Unmute output
X@
(signal is output).
Read channel mute
X@B X$]
1 = mute on, 0 = mute off.
Global channel mute
1*B
Vmt1
]
Mute all outputs.
Global channel unmute
0*B
Vmt0
]
Unmute all outputs.
View output mutes
EVM}
X$
1
X$
2
... X$
n
]
Each
X$
response is the mute status of an output,
starting from output 1.
n = the maximum number of outputs for your
configuration.
Save and recall presets
NOTE: If you try to recall a preset that is not saved, the matrix switcher responds with the error code E11.
Save current configuration as a
global preset
X%, SprX%]
Command character is a comma.
Example:
9,
Spr09
]
Save current ties as preset 9.
Recall a global preset
X%. RprX%]
Command character is a period.
Example:
5.
Rpr05
]
Recall preset 5, which becomes the current
configuration.
Command ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Information requests
Information request
I
V
X^XX&•A0X0•SX*
1
X*
2
...X*
n
]
In the response:
V
X^
X
X&
shows the number of available inputs and
outputs for this configuration.
A0X0
has no meaning for this product.
S
X*
1
X*
2
...
X*
n
shows the board type installed in each
slot. n is the highest numbered board in your system,
4
,
5
,
8
, or
9
.
Request part number
N
X(]
See the Extron website, www.extron.com, for part
numbers.
Request part number and board
configuration
*N
X(.X*
1
X*
2
X*
3
...X*
n
]
n is the highest numbered board in your system,
4
,
5
,
8
, or
9
.
Query controller firmware
version
Q
X1)]
Example:
Q
1.23
]
The factory-installed controller firmware version is
1.23
(sample value only).
NOTE: X@ = Output number 01 – maximum number of outputs for your conguration
X$ = Mute status 0 = not muted, 1 = muted
X% = Global preset number 01 – 32
NOTE: X^ = Inputs Total number of inputs for this switcher
X& = Outputs Total number of outputs for this switcher
X* = Board installed X0 = No board installed
C1 = 4 DVI inputs by 4 DVI outputs F1 = 4 ber inputs x 4 ber outputs
C2 = 4 DVI inputs by 0 outputs F2 = 4 ber inputs x 0 outputs
C3 = 0 inputs by 4 DVI outputs F3 = 0 inputs x 4 ber outputs
X( = Part number 60-nnnn-nn
X1) = Firmware version number to second decimal place (x.xx)