Filter
Top Products
22
MSX1616 OPERATION MANUAL - v1.0 5/8/02 2002 - INLINE, INC.
Resetting the Switcher
1. Press MENU until 0DLQ0HQX displays in the LCD.
2. Press the soft key pointing to $GYDQFHG.
Result: $GYDQFHG0HQX displays in the LCD.
3. Select the soft key pointing to 5HVHW8QLW.
Result: 5HVHW0HQX displays in the LCD.
4. You can do either a partial reset or a full reset.
a. To do a partial reset, press the soft key pointing to 3DUWLDO5HVHW.
Result: The switcher resets the RS232 serial port, opens all input/output patches,
resets all volume levels, sets all outputs to un-mute state, and removes any
address given to the unit.
i. Press ENTER to reset.
ii. Press MENU to exit.
b. To do a full reset, press the button pointing to )XOO5HVHW.
Result: The switcher resets the RS232 serial port, opens all input/output patches,
resets all volume levels, removes any address given to the unit, and clears all
saved presets and labels. This process may take up to 2 minutes, if all presets are
used.
i. Press ENTER to reset.
ii. Press MENU to exit.
Activating RGB Delay
This feature allows older model projectors (or a series of projectors) time to synchronize their
signals so the image pops cleanly and clearly onto the screens. Set RGB delay for up to 6
seconds.
1. Press MENU until 0DLQ0HQX displays in the LCD.
2. Press the soft key pointing to $GYDQFHG.
Result: Advanced Menu displays in the LCD.
3. Select the soft key pointing to 5*%'HOD\.
Result: 5*%'HOD\7LPH displays in the LCD.
4. Use either the up-and-down or the left-and-right menu navigation buttons to set the RGB
delay time.
5. Press ENTER to accept the changes.
6. Press MENU to exit.