Filter
Top Products
2002 - INLINE, INC. MSX1616 OPERATION MANUAL - v1.0 5/8/02
MSX1616 Matrix Switcher - Quick Start, continued
Front Panel Controls
Buttons to the left of the LCD let you
navigate through the LCD menu options.
Arrowed buttons let you increase or
decrease a selection, scroll up or down,
move forward and backward, and change
inputs and outputs.
MENU displays the status menu on the
initial press. Subsequent presses display the
next menu level up.
ENTER saves newly selected menu
settings.
VOLUME adjusts the volume of the
selected audio output or input.
MUTE silences the selected audio output.
INPUT and OUTPUT buttons configure
any number of new patches.
TAKE performs the input-to-output
switches as configured.
PRESET recalls a preset configuration,
which includes all input/output patches and
volume levels.
BLANK acts as an input when creating
patches. Use it to blank any or all outputs.
CANCEL deletes unsaved configurations.
Functionality
Creating new patches
1. Press the button of the desired input
device.
2. Press the button(s) of the output(s)
where you want the input signal
sent.
3. Repeat steps 1 and 2 until all
connections are defined.
4. Press TAKE to perform the patches.
Alternately, use the LCD menu.
Adjusting audio levels
1. Use the VOLUME buttons on the
front panel to increase or decrease
volume level for the currently
selected output.
2. Press MUTE to silence the audio
output.
Creating a preset
1. Set all desired input/output patches,
audio levels, and mute states.
2. Press MENU.
3. Select 3UHVHW6WRUH on the
LCD.
4. Press any one of the input or output
buttons to select a storage location
for this preset.
Result: The switcher stores the
current configuration into memory.
Viewing switches
1. On the LCD Menu, select
3UHYLHZ.
2. Select and press an input or output
button to see all current switches.
Result: The LED indicators above
each button glow to indicate all
stored patches for those
inputs/outputs.