Extron electronic TLP VIM Switch User Manual


  Open as PDF
of 16
 
Installation and
Operation
This chapter shows how to install and operate the TLP VIM Video
Input Module.
Topics that are covered include:
z InstallationOverview
z MountingtheTLPVIM
z TLPVIMFrontandRearPanelFeatures
z Operation
Installation Overview
To install and set up the TLP VIM, follow these steps:
1. Turn all equipment off. Make sure the video sources (DSS,
cable boxes, PC, laptop, or other devices), the TLP VIM, and the
touchpanel are turned off and disconnected from power sources.
2. Mount the TLP VIM, see "MountingtheTLPVIM", below.
3. Attach the cables, see "TLPVIMFrontandRearPanelFeatures"on
page4.
4. Connect power cords and turn on the devices, see "Operation"on
page6 .
Mounting the TLP VIM
The TLP VIM includes hook and loop fasteners so that it can be
securely mounted on or under a table or podium near to the
touchpanel.
Shut off all power to connected devices, then mount the TLP VIM as
required.
TLPVIM•InstallationandOperation 3
 previous next