Filter
Top Products
Installation, cont’d
TPS150 Switching and Transmission System • Installation2-2
Installation
Mounting the Transmitter and Receiver
The TPS150 comes with rubber feet for the transmitter and receiver, a set of
MTR102 rack ears for the transmitter, and a set mounting brackets for the receiver.
Rack mounting the transmitter
If desired, rack mount the transmitter as follows:
1. Remove the rubber feet from the bottom of the transmitter.
2. Attach the 992546-2 rack mounting ears to the transmitter with the six
provided #8 machine screws (figure 2-1).
3. Insert the transmitter into the rack, aligning the holes in the mounting bracket
with those of the rack.
# 8 Screw (6 Plcs)
Each Side
I
N
P
U
T
S
E
L
E
C
T
1
2
3
4
B
L
A
N
K
M
U
T
E
P
O
W
E
R
P
R
O
J
E
C
T
O
R
P
O
W
E
R
V
O
L
U
M
E
TPT15
0
A
/V Sw
itc
her
/ T
w
isted
Pair T
ran
sm
it
ter
Figure 2-1 — Mounting the transmitter
4. Secure the transmitter to the rack using the supplied machine screws.
Projector mounting the receiver
If desired, projector mount the receiver as follows:
1. Remove the rubber feet from the bottom of the receiver.
2. Attach the supplied 992547-2 projector pole mounting brackets to the receiver
with the four provided #8 machine screws (figure 2-2).