Filter
Top Products
TPS150 Switching and Transmission System • Reference InformationA-2
Reference Information
Specifications
Video
Gain ................................................ Unity
Crosstalk ....................................... -42dB @ 10 MHz
Number/signal type ................... 1 set of proprietary analog signals
Connectors ................................... 1 RJ-45 female jack
Video input
Number/signal type
TPT150 ............................... 1 VGA-UXGA RGBHV, RGBS, RGsB with 1 RGB buffered local monitor
loop-through
1 VGA-UXGA RGBHV, RGBS, RGsB
2 component video (Y, R-Y, B-Y), or S-video, or composite video
TPR150 ............................... 1 set of proprietary analog signals from a TPT150
Connectors
TPT 150 .............................. 2 female 15-pin HD (RGB input)
1 female 15-pin HD (RGB loop-through)
2 sets of [3 female RCA (component video), 1 female RCA (composite),
1 female 4-pin mini DIN (S-video)]
TPR150 ............................... 1 female RJ-45 jack
Nominal level ............................... 1 V p-p for Y of component video and S-video, and for composite video
0.7 V p-p for RGB
0.3 V p-p for R-Y and B-Y of component video, and for C of S-video
Minimum/maximum levels ....... Analog: 0.3 V to 1.5 V p-p with no offset at unity gain
Impedance .................................... 75 ohms
Return loss .................................... <-44dB @ 5 MHz
DC offset (max. allowable) ......... ±0.5 mV
Video output
Number/signal type
TPT150 ............................... 1 set of proprietary analog signals
TPR150 ............................... 1 RGBHV, RGBS, RGsB
1 component video(Y, R-Y, B-Y)
1 S-video
1 composite video
Connectors
TPT150 ............................... 1 female RJ-45 jack
TPR150 ............................... 1 female 15-pin HD (RGB)
3 female RCA (component video)
1 female 4-pin mini DIN (S-video)
1 female RCA (composite video)
Nominal level ............................... 1 V p-p for Y of component video and S-video, and for composite video
0.7 V p-p for RGB
0.3 V p-p for R-Y and B-Y of component video, and for C of S-video
Minimum/maximum levels ....... 0.3 V to 1.5 V p-p
Impedance .................................... 75 ohms
Return loss .................................... -22dB @ 5 MHz
DC offset ....................................... ±0.5 mV with input at 0 offset
Sync
Input type ..................................... RGBHV, RGBS, RGsB
Output type .................................. RGBHV, RGBS, RGsB (follows input)