Filter
Top Products
23
Internal Battery Pack Replacement
1. Loosen and remove the screws on the left hand front panel. Remove the panel from
the unit.
2. Lay the panel aside for reassembly.
3. Loosen and remove the screws of battery stoppers. Lay them aside for reassembly.
4. Grasp the battery pack, and pull it out of the front of the unit. Marking the top of the
pack.
5. Unpack the new battery pack. Take care not to destroy the packing. Compare new
and old battery pack to make sure they are the same. If so, proceed with next the
STEP, otherwise STOP and contact Falcon Service.
6. Line up and slide in the new replacement battery pack in the correct orientation, by
referring to the mark on the original battery pack.
7. Gently push the battery pack back into the cabinet. Ensure it is tightly seated into
the unit.
8. Reinstall the battery stoppers with the screws.
9. Reinstall the panel to the unit with the screws.