Filter
Top Products
Fargo M30e CUPS Driver User Guide (Rev. 1.0.3)
13
Printer Maintenance
Performing a Ribbon Sensor Calibration
Step
Description
1
Remove all cards from the Card Hopper and close the Hopper door.
2
Open the Front Cover, remove the Ribbon Cartridge and close the Printer’s
front cover.
3
Place a notebook or a completely opaque sheet of paper in front of the
Printer to block the ambient light.
4
From a terminal window enter:
lpr -l “/usr/share/fargo/M30e/RibbonCal.prn”
5
When completed, the Printer will beep twice.