Filter
Top Products
17
TABLE 1INPUT SIGNALS AND ADJUSTABLE/SETTING ITEMS
CINEMA MODE
In
AUTO
the deinterlacer recognises if the video signal source
is a movie film (obtained from a Telecine device with 3:2 or 2:2
pull-down) and applies a deinterlace algorithm optimised for this
type of signal.
If the video signal source is not identified as a film, or if you
select
NO
the deinterlacer applies a Motion compensated
algorithm optimised for video camera signals.
VIDEO TYPE
Activates a filter to improve stability of pictures from video
recorders. To toggle between
NORMAL, VCR1
mode and
VCR2
mode press on the remote control.
NOISE REDUCTION
This adjustments allows to choose the filter value for noise
reduction purposes.
As soon as this option is selected on the menu, the image is
divided in two parts.
In the left side the image is not altered by the filter, in the right
part the filter is activated.
This allows you to compare the effect of the filter.
It is possible to deactivated the filter (
NOT ACTIVE
), to use the
automatic adjustments (
AUTO
) or to manually select (
MANUAL
)
the value suitable for the image with the
VALUE
adjustment.
In case of using the
VALUE
adjustement, it is enoght to select to
cursor below and set the value with the / keys of the remote
control.
Associated to the
NOISE REDUCTION
there is the possibility to use the
specific function
(FLESH TONE CORRECTION)
to make skin tone more
natural. Often the use of noise reduction filter slightly degrades
the image in those areas where skin tones are visible. With the
use of this function it is possible to maintain an excellent image
quality throughout the entire projected image.
BRIGHTNESS
CONTRAST
Video
S-Video
RGBS YCrCb RGB Grafico
DIGITAL INPUT
RGBS 15kHz
YCrCb 15kHz
ADJUSTEMENTS
INPUTS
COLOR --
-
--
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TINT
(NTSC)
SHARPNESS
SHARPNESS MODE
FILTER
Adjustable/can be set
Not adjustable/can not be set
CINEMA MODE
VIDEO TYPE
FLESH TONE CORRECTION
NOISE REDUCTION
-
-
-
-
-
-
-