3
English
Product Profile
This product is built to shred
paper, staples, small paper clips
and credit cards
. It is not built to shred adhesive labels, trans-
parencies, newspaper, cardboard, large paper clips, or plastic
(other than credit cards). Attempting to shred items not intended
for this shredder may cause damage.
Strip-Cut Strip-cut Confetti-cut
(220-2) (220-2) (220C-2)
Sheet capacity* 18-20 sheets 16-18 sheets 12-14 sheets
Paper shred size 5,8 mm 3,9 mm 3,9 x 25 mm
Maximum paper width 241 mm 241 mm 241 mm
Recommended daily capacity 6,000 sheets 6,000 sheets 3,000 sheets
*Based on A4 (70 g/m
2
) paper with shredder operating at rated voltage; heavier paper, high humidity, or other than rated
voltage may reduce sheet capacity.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING
While setting up shredder
•Check shredder for damage or defects; some paper particles in the basket are normal
due to product testing and does not indicate a defect.
•Avoid touching exposed blades on underside of confetti-cut shredder head.
•Plug power cord in an outlet that can easily be reached. The plug is the primary electri-
cal disconnect.
•Make sure the electrical rating listed on the serial label (located near the power cord on
the back of the shredder) matches the available electric power.
•Do not place shredder near or over a heat or water source.
While operating shredder
•Keep hands and hanging objects (jewelry, ties, loose clothing,
long hair, etc.) away from paper entry.
•Keep children and pets away from the shredder.
When not in use
•Always turn off and unplug shredder.
•Unplug before emptying basket.
•Do not open shredder head: Danger of electric shock.
Opening shredder head will void the warranty.
NOTE:
Do not use flammable synthetic oil, petroleum-based products or aerosols of any
kind on or near product at any time.