HARDWARE REQUIRMENTS
The Fellowes Opti Gel Cordless requires a PC-compatible computer with
an available USB or PS/2 port. The Opti Gel Cordless will function as a
stardard one-button mouse when connected to a Macintosh USB port.
SOFTWARE REQUIRMENTS
The Fellowes Opti Gel Cordless requires Windows 95/98/NT
4.0/2000/ME or XP. Be sure to check the Fellowes website at
www.fellowes.com for the latest drivers supporting the latest
operating systems. If you system operates using Windows NT 4.0, do
not install the Fellowes Easy Point software. The mouse will function
using the native drivers in the NT 4.0 operating system.
GET CONNECTED
Installing the Software
a. Un-install or remove the current mouse driver. Before installing the
Fellowes Easy Point driver, we suggest you check if any other mouse
driver is installed in your system. If yes, to avoid conflict with the
Fellowes driver, please un-install or remove that driver before
installation of the Fellowes Easy Point software.
b. Remember to save your Fellowes Easy Point CD in case you ever need
to reinstall the software.
c. The input device will not function properly without installation of the
Fellowes Easy Point software. The device will work as a basic mouse
as soon as you plug it in, but to make full use of the device, you must
install the software.
d. Turn on the power to your computer.
e. Insert the Fellowes Easy Point CD into your CD-ROM drive. The
Fellowes Easy Point software is programmed to Auto Run, however if
this function is disabled in your computer please follow the steps
outlined on the next page:
4
3
2