Fellowes Venus 125 Laminator User Manual

Open as PDF

of 4

125

ENGLISH

ENG

IMPORTANT SAFETY INSTRUCTIONS — Please Read Before Using!

• The socket-outlet shall be installed near the equipment and

shall be easily accessible.

• To prevent electrical shock, do NOT use laminator close to

water and do NOT spill water on laminator, electric cord, or

wall socket.

• Do not leave electric cord in contact with a warm surface.

• Do not leave electric cord hanging from a cupboard or shelf.

• Do not use laminator if electric cord is damaged.

• Do not laminate metal objects.

• Only use pouches speciﬁ cally designed for the lamination setting you intend to use.

• Always supervise children during laminator operation.

• Keep pets away from laminator while in use.

• Switch off and unplug laminator when not in use.

• Only open the laminator as explained under “Maintenance”. Do not open or attempt

to repair in any other way, as this could result in electric shock and will void your

warranty. Contact Customer Service if you have questions. Please note the warranty

does not apply in cases of abuse, mishandling or unauthorized repair.

Discrete carry

handles at side

Active Cooling System

Temperature controlled

release trigger for lid

Support Shelf on entry to

guide Laminate path

LCD Interface for

user guidance

HeatGuard Technology™ double-walled

insulation keeps heat inside

Opening lid to clean

laminating mechanism

CAPABILITIES

Pouch Thickness 3-10 mil

Estimated Heat-Up Time 4 Minutes

Approximate Cool-Down Time 60 Minutes

Lamination Speed 18”/Minute

Maximum Width 12.5”

Voltage 120V

Frequency 50/60 Hz

Laminating capacity – 3 to 10 mil hot laminating pouches per side

1000 Watt

Dimensions: 4 3/4” (w) x 21 7/8” (d) x 9 5/8” (h)

Max document thickness 1/32”

IMPORTANT SAFETY INFORMATION

This laminator is equipped with an Auto shut-

off function. It will turn the laminator into

stand-by mode, if it has not been used for

over 60 minutes. The LCD screen will show

the sleep screen when in stand-by.

COLD

mic

100

mic

HELP? TEMP

175

mic

125

mic

To switch the laminator back on, simply press the

stand-by button at the left of the front operating

panel.

During lamination, the direction of the pouch can be

reversed, if you are unsure about the progress of the

lamination. To do so, press down the reverse key.

This will eject the pouch back at the front entry.

Open Cover Animation

Ready Screen

Forward Rolling Animation

Ready Screen

Increase number

Decrease number

Move Highlight

1 position down

Move Highlight

1 position up

Select the highlighted

element on the screen.

Warming Up Progress Bar

Return to the Main

Menu when animation

is complete.

Save

system settings.

Go to

Main Menu

COLD