Fellowes Venus 125 Laminator User Manual


  Open as PDF
of 4
 
RELEASE
COVER
Reverse Rolling Animation
Venus Laminator User Interface Display Illustrations
Manual Open Cool down AnimationJam Cool down Animation
Startup Screen
Show logo for 3 - 4 seconds
for startup before advancing
to the menu.
Cooling Down Progress BarPouch Selection Screen
Pouch Selection Screen
Pouch Selection Screen
C
old Lamination
Hot Lamination
Custom Temperature
Warming Up Progress Bar
EXIT
+2
-2
Select the
highlighted
element
on the screen.
EXIT
˚F mic
˚C
mil
EXIT
˚F
˚C mil
mic
EXIT
mic
mil
˚C
˚F
COLD
3
mil
4
mil
HELP? TEMP
??
5
mil
COLD
3
mil
4
mil
HELP? TEMP
??
7
mil
7
mil
5
mil
3
mil
4
mil
HELP? TEMP
??
7
mil
5
mil
3
mil
COLD
120
C
®
A
B
CE
D
A
B
CE
D
INFORMATION SCREEN
6
SELECTING LAMINATION TEMPERATURE
TROUBLESHOOTING
SYSTEM SETTING SCREENS
This sequence of display animations will play step by step in the background
when the laminator is not in use.
Select North America or European settings.
COLD LAMINATION STEPS
Position laminator so you
have enough space to allow
items to pass freely through
the machine.
1. Connect power cable to inlet
at back of laminator.
3. Press Stand-by button at left
of front operating panel to switch
laminator on.
4. Use navigation keys to select
setting for cold lamination
5. Center item on clear side against
sealed edge; documents cannot be
repositioned once laminated.
For best results use
Fellowes® brand pouches
(Enhance3 – Preserve10).
Select correct pouch size for
laminated item.
2. Switch laminator on with Power On /
Off button at back of machine
3
BEFORE YOU LAMINATE
1
2
COLD
80
mic
100
mic
HELP? TEMP
??
175
mic
125
mic
3
COLD
80
mic
100
mic
HELP? TEMP
??
175
mic
125
mic
4
5
CAUTION: Only use self-adhesive pouches when laminating with a cold setting.
6. Peel a small part of the protective
sheet away from document.
Place pouch, sealed edge fi rst, into
laminator entry. Keep pouch straight
and use the edge guide to centre it.
Continue peeling the protective sheet
away.
6
• Always put item in a pouch. Never laminate an empty pouch.
• Trim excess pouch material from around your item after laminating and cooling.
• Before laminating valuable items, do a test run with an item similar in size and
thickness.
TIPS
• Do not laminate heat-sensitive documents (i.e., tickets, ultrasounds, etc.)
• Use a dry-erase marker for writing on laminated pouches.
402103.venus.110606_3L.PS.indd Sec6:6-Sec2:3402103.venus.110606_3L.PS.indd Sec6:6-Sec2:3 11/28/06 10:03:13 AM11/28/06 10:03:13 AM
 previous