Filter
Top Products
FS-8700-82 Carrier DataLink Page 22 of 31
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
This example illustrates a Map Descriptor which reads a table and dumps the response in ASCII format to the error log. The error
log can be dumped to a file on your computer using RUIDEBUG (Refer to FieldServer Utilities Manual)
Data_Arrays
Data_Array_Name,
Data_Format,
Data_Array_Length
DA_DUMP , BYTE , 2000
Map_Descriptor_Name,
Data_Array_Name,
Data_Array_Offset,
Function,
Node_Name,
Length,
Scan_Interval,
Table_Name,
Field_Name , Store_As
Md1 , DA_DUMP , 0 , rdbc , FAN01 , 1000 , 5.0s , DISPLAY , EVERYTHING, AsciiLog
The following fragment from the error log is typical of the response to a Map Descriptor like the one above.
Ascii Dump Requested for MD=<Md1> Table=<DISPLAY>
DEV 02 DISPLAY
Desired Mode Off MODE
Equipment Status NORMAL ALARM
Controlling Setpoint 75.0 dF CSPT
Controlling Temperature -40.0 dF SPT
Space Temperature -40.0 dF RAT
Supply Air Temperature -40.0 dF SAT
Fan Mode Off FANSTAT
Cooling Capacity 0.0 % CCAP
Heating Capacity 0.0 % HCAP
These are variable names.
Use these names in your
Map Descriptors.
Variable descriptions.