Filter
Top Products
6. Maintenance
101
Resetting the Lamp Time Counter
After replacing the lamp(s), the lamp hour counter(s) should be reset to zero. Refer to the following guide:
1.
Press the Menu button on the OSD
control panel or Remote Control to
open the Main menu.
2.
Press the ▲or▼ button
to move to
the Reset menu and press Select.
3.
The Reset menu is displayed. Se-
lect Clear lamp1 time or Clear
lamp2 time as required using
▲or▼ and press Select.
4.
A confirmation box is displayed.
Select OK using ◄ or ► and
press Select to reset the selected
Lamp hours to zero.
Ordering a Replacement Lamp
Replacement lamp can be ordered through your dealer. When ordering, give the following information to the dealer.
• Model No. of your projector: PDG-DWT50L, PDG-DWT50KL
• Replacement Lamp Type No: POA-LMP117
(Service Parts No. 610 335 8406)