Filter
Top Products
8. Specifications
115
PC Control Codes and Cable Connections
This projector provides a function to control and monitor the projector's operations by using the RS-232C serial port.
1.
Connect a RS-232C serial cross cable to
SERIAL PORT IN on the projector and serial
port on the PC.
Launch a communication software provided
with PC and setup the communication condi-
tion as follows:
Baud rate : 38400 bps
Parity check : none
Stop bit : 1
Flow control : none
Data bit : 8
2.
Type the command for controlling the projec-
tor and then enter the "Enter" key.