Fisher PLC-XU70 Projector User Manual


 
51
Maintenance and Cleaning
Disconnect the AC power cord before cleaning.
When the projector is not in use, replace the lens
cover.
1
3
2
Follow these steps to clean the projection lens.
Cleaning the Projector Cabinet
Disconnect the AC power cord before cleaning.
1
Softly wipe the projector body with a soft, dry cleaning
cloth. When it is heavily soiled, use a small amount of
mild detergent and finish with a soft, dry cleaning
cloth. Avoid using an excessive amount of cleaner.
Abrasive cleaners, solvents, or other harsh chemicals
might scratch the surface.
2
Follow these steps to clean the projector cabinet.
When the projector is not in use, put the projector in
an appropriate carrying case to protect it from dust and
scratches.
3
Softly wipe the projection lens with a cleaning cloth
that contains a small amount of non-abrasive camera
lens cleaner, or use lens cleaning paper or a
commercially available air blower to clean the lens.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might
scratch the surface.
Cleaning the Projection Lens