Filter
Top Products
43
SETTING
The PIN code can be changed to your desired four-digit number.
Select “PIN code change” with the POINT DOWN button, and
press the SELECT button. A New PIN code input dialog box
appears.
Select a number with the POINT LEFT/RIGHT buttons and fix the
number with the SELECT button. Repeat it to complete entering a
four-digit number. When the four-digit number is fixed, the pointer
automatically moves to “Set.” Then press the SELECT button.
To Change the PIN Code
Change the PIN code
Select PIN code
change and press the
SELECT button. The
New PIN code input
dialog box appears.
The input numbers
are being displayed
for confirmation.
Select “Off,” “On1,” or “On2” with the POINT LEFT/RIGHT buttons
and then go to “Quit” with the POINT DOWN button. Press the
SELECT button to close the dialog box.
To Change the PIN Code Lock setting
Changing the PIN code lock setting
Select a desired setting
with the POINT
LEFT/RIGHT buttons.
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE DOWN
A NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO
ON PAGE 60, AND KEEP IT SECURELY. SHOULD THE PIN
CODE BE LOST OR FORGOTTEN, THE PROJECTOR CAN NO
LONGER BE OPERATED.
PIN code lock
This function prevents the projector from being operated by an
unauthorized person and provides the following settings for
security options.
Off . . . . the projector is not locked with the PIN code.
On1 . . . requires to enter the PIN code every time turning on
the projector.
On2 . . . requires to enter the PIN code to operate the projector
once the power cord is disconnected; as long as the
AC power cord is connected, the projector can be
operated without a PIN code.
Whenever you change the PIN Code Lock setting or the PIN code
(the four-digit number), you are required to enter the PIN code.
“1234” is set as the initial PIN code at the factory.
PIN code lock
When the projector is
locked with the PIN
code, the PIN code
lock mark appears on
the menu bar.
Entering a PIN code
Quit
Pointer
The input numbers
change to “✳” for security.
When the pointer
automatically moves to
“Set,” press the SELECT
button.
To Enter a Logo PIN code
Select a number by pressing the POINT LEFT/RIGHT buttons and
fix the number with the SELECT button. The number changes to
“✳.” If you fixed a wrong number, move the pointer to “Set” or
“Clear” once by pressing the POINT DOWN button, then return to
“PIN code.” Enter the correct number.
Repeat this step to complete entering a four-digit number.
When the four-digit number is fixed, the pointer automatically
moves to “Set.” Press the SELECT button so that you can change
the PIN code lock settings.
If you entered a wrong PIN code, “PIN code” and the number
(✳✳✳✳) turn red and disappear. Enter a Logo PIN code all over
again.