Fisher PLC-XU22N Projector User Manual


 
14
BEFORE OPERATION
OPERATION OF THE REMOTE CONTROL
VOLUME
ON-OFF
FOCUS
ZOOM
VIDEO
COMPUTER/
MCI
D.ZOOM
MENU
MUTE
LASER
KEYSTONE
NO SHOW
FREEZE
AUTO IMAGE
NORMAL
PAGE
Used to select source either
COMPUTER or MCI mode.
(P23, 33)
Used to select VIDEO
source. (P30)
Used to execute the item
selected or to expand the
image in DIGITAL ZOOM
mode. (P29, 37)
It is also used as a PC mouse
in Wireless Mouse Operation.
(P41)
POWER ON-OFF BUTTON
Used to turn the projector on
or off. (P20)
MENU BUTTON
Used to call MENU
operation. (P17-19)
SELECT BUTTON
ON
ALL OFF
ALL-OFF SWITCH
When using the Remote Control
Unit, turn this switch to “ON” and
turn it “ALL OFF” when it is not
used.
Used to move the pointer on
the MENU, to adjust the item,
or to pan the image in DIGITAL
ZOOM mode. (P29, 37)
It is also used as a PC mouse
in Wireless Mouse Operation.
(P41)
When pressing the center of this
button, it works as the SELECT
button.
VIDEO BUTTON
COMPUTER/MCI BUTTON
POINT BUTTON
LASER BUTTON
Used to operate laser pointer
function. The laser beam is
emitted while pressing this
button within 1 minute. When
using the laser pointer for
more than 1 minute, release
the button and press it again.
This remote control emits a laser beam as the Laser Pointer from the Laser Light Window. When the LASER button is
pressed, the laser light goes on. And when the button is pressed more than 1 minute or the button is released, light goes off.
Laser light is emitted with the RED light which tells the laser beam being emitted.
The laser emitted is a class II laser; therefore, do not look into the Laser Light Window or shine the laser beam on yourself or
other people. The three marks bellow are the caution labels for the laser beam.
CAUTION : Use of controls or adjustments or performance of procedures other than those specified herein may result
hazardous radiation exposure.