Fisher PLC-XU22N Projector User Manual


 
34
MCI MODE
INDEX SELECTION
PAGE SELECTION
Move the arrow to
each operation and
press the SELECT
button.
1
2
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select VIEW
and press the SELECT button. Another dialog box VIEW
SETTING menu will appear.
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to "Index", and then press the
SELECT button.
The table of Indexes in the memory card will
appear.
3
Press the POINT UP/DOWN/LEFT/RIGHT buttons to move to
the Index that you want to project and press the SELECT
button. The first Page of the Index selected is displayed.
(Press SELECT button again to display the table of Pages.)
1
2
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select VIEW
and press the SELECT button. Another dialog box VIEW
SETTING menu will appear.
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to "Page", and then press the
SELECT button.
The table of pages of the index card will
appear.
3
Press the POINT UP/DOWN/LEFT/RIGHT buttons to move to
the Page that you want to project and press the SELECT
button. The page selected is displayed on the screen.
The table of Pages can be displayed by pressing the SELECT
button when the page is displayed on full screen.
SHOW THE DATA IN THE MEMORY CARD
BASIC OPERATION
This projector can project only the image data in Bit Map type or in JPEG type or the data edited by Media Card Imager
(supplied) through the PC CARD SLOT. Other data is not available and should be edited and written in a memory card
with Media Card Imager before loading PC CARD SLOT.
(The data in Bit Map type or in JPEG type, such as the data captured with a digital camera, can be projected directly
through PC CARD SLOT.)
If there are the data edited by Media Card Imager and other data (such as in Bit Map type or JPEG type) together in
one memory card, the data edited by Media Card Imager has a priority to be projected with the LCD projector. The
other image data in Bit Map type or JPEG type is not projected. In that case, edit those data and write in the memory
card with the Media Card Imager.
Pages in the Index
Index
Select the Index
1
2
Insert the memory card and turn the projector into MCI mode.
The image in the memory card is displayed.
To change the image to others, press the PAGE or
button. (When the “Display Timer” is set in the image with the
Media Card Imager, the image is changed to another
automatically.)
To select Index or Page in the table, follow the instructions of
INDEX SELECTION and PAGE SELECTION.
Index and Page
The data edited with Media Card Imager is the Index format
consisting of several Pages
. To project the desirable image,
select the Index and then select the Page in the Index.