Filter
Top Products
Introducing the Fluke 43B
Instrument Setup
1
17
Selecting Probes
For standard operation, use the red test lead on input , the black test
lead on COM
and the current clamp on input . If you are using
other test leads or probes, you must change the probe settings accordingly.
1
Open the main MENU.
2
3
Select the type of probe you are going to use
on input 1. For all applications in the
Applications Guide, you must use test leads.
4
(for example)
5
Accept the probe settings for
input 1. The screen closes.
6
Select PROBES again.
Select the sensitivity of the current probe you are going to use on input 2.
For all applications in the Applications Guide, use the 80i-500s current probe
and choose 1 mV/A.
INSTRUMENT SETUP
PROBES
TEST LEADS