Filter
Top Products
1010
To install the FortiSwitch unit into a rack
1. Ensure that the FortiSwitch unit is placed on a stable
surface prior to rack-mount installation.
2. Attach the provided rack-mount brackets to the sides of
the unit using the provided bracket screws.
3. Position the FortiSwitch unit in the rack. Ensure there is
enough room around the unit to allow for sufficient air
flow.
Installation
3
Caution:
Electrostatic
discharge (ESD)
can damage
your Fortinet
equipment.
Do not place
heavy objects on
the unit.
To avoid personal
injury or damage
to the unit, it is
recommended
that two or more
people install the
unit into the rack.
Note: If the unit
has a redundant
power supply,
each power
cable should be
connected to a
different power
source. In this
way, if one power
source fails, the
other may still be
operational and
the unit will not
lose power.
The FortiSwitch unit can be placed on any flat surface, or mounted in any standard
19 inch rack unit with the provided rack-mount brackets and screws.
Please read the Cautions and Warnings section prior to installing your device.