Filter
Top Products
88
To Connect to the CLI
1. Connect the device’s console port to the management computer using the provided
console cable.
2. Start a terminal emulation program on the management computer, select the
COMport, and use the following settings:
Baud Rate: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None
3. Press Enter on your keyboard to connect to the CLI.
4. Login using username “admin” and no password. You can now proceed with
configuring your device.
Get started by typing “?” for a list of available commands.
Begin typing a command then type “?” for a list of available ways to complete.
For example “config ?” will show the lowest level of configuration options.
Terminal Emulation with Console
Cable
B
Console Port
Serial Port