Filter
Top Products
Configuring the modem interface Configuring the modem using the CLI
FortiGate-60B FortiOS 3.0 MR6 Install Guide
01-30006-0446-20080910 43
Example
This example shows how to enable the modem and configure the modem to act
as a backup for the WAN1 interface. Only one dial-up account is configured. The
FortiGate unit and modem will attempt to dial this account 10 times. The FortiGate
unit will wait 5 seconds after the WAN1 interface recovers before switching back
to the WAN1 interface.
phone1
<phone-number>
Enter the phone number required to
connect to the dialup account. Do not
add spaces to the phone number.
Make sure to include standard special
characters for pauses, country codes,
and other functions as required by your
modem to connect to your dialup
account.
No default.
phone2 <phone-number> Enter the phone number required to
connect to the dialup account. Do not
add spaces to the phone number.
Make sure to include standard special
characters for pauses, country codes,
and other functions as required by your
modem to connect to your dialup
account.
No default.
phone3 <phone-number> Enter the phone number required to
connect to the dialup account. Do not
add spaces to the phone number.
Make sure to include standard special
characters for pauses, country codes,
and other functions as required by your
modem to connect to your dialup
account.
No default.
pin-init <string> Enter additional pin initialization strings
that may be required for a proper
connection.
No default
priority <integer> Enter the priority of learned routes on
this interface.
Valid priorities are from 0 to
4294967295.
0
redial <tries_integer> Set the maximum number of times (1-
10) that the FortiGate unit dials the ISP
to restore an active connection on the
modem interface. Select none to allow
the modem to redial without a limit.
No default.
status
{disable | enable}
Enable or disable modem support. This
is equivalent to bringing an interface up
or down.
disable
username1 <name_str> Enter the user name used to access
the specified dialup account.
No default.
username2 <name_str> Enter the user name used to access
the specified dialup account.
No default.
username3 <name_str> Enter the user name used to access
the specified dialup account.
No default.
wireless-custom-vendor-id
<hex_string>
Enter the wireless modem vendor ID
as a hexadecimal number.
No default
wireless-custom-product-id
<hex_string>
Enter the wireless modem product ID
as a hexadecimal number.
No default
Keywords and variables Description Default