Filter
Top Products
70 05-16000-0082-20050115 Fortinet Inc.
Vulnerability reports Reports
Figure 39: Selecting scan targets
To select the scan targets
1 Go to Reports > Config > Vulnerability.
2 Select a report from the list.
3 Select Scan Targets.
4 Select devices from the Available IP Aliases list.
5 Select the right arrow to move the device to the Selected IP Aliases list.
6 To add additional devices, select Create New, and repeat step 4 and 5.
7 Select Apply.
To add additional devices
1 Select Create New.
2 Enter a name of the host, network or IP address range in the Alias text box.
3 Enter the IP address of the host, network or the IP range.
4 Select OK.
5 Select the device from the Available IP Aliases list.
6 Select the right arrow to move the device to the Selected IP Aliases list.
7 Select Apply.
Creating a scan target profile
You can save the selections as a scan target profile. After creating a scan target
profile, you can select the profile for use in other vulnerability reports.
To create a scan target profile
1 Select New.
2 Enter a name for the profile and select OK.
3 Select the devices to include in the profile.