Filter
Top Products
FortiLog CLI reference CLI commands
FortiLog Administration Guide 05-16000-0082-20050115 91
CLI commands
The FortiLog CLI commands include:
• execute branch
• get branch
• set branch
• unset branch
execute branch
Use execute to run static commands, to reset the FortiLog unit to factory defaults, to
back up or restore FortiLog configuration files, and to reboot or shut down the FortiLog
system.
Table 4: execute command architecture
execute
reload <return>
restore
config <string> <xxx.xxx.xxx.xxx> <return>
image <string> <xxx.xxx.xxx.xxx> <return>
backup config <name_str> <xxx.xxx.xxx.xxx> <return>
reboot <return>
factoryreset <return>
save config <return>
shutdown <return>
formatlogdisk <return>
Commands Description
execute reload If you set your console to batch mode, use this command to flush the
current configuration from system memory and reload the configuration
from a saved configuration file.
execute restore config <string>
<xxx.xxx.xxx.xxx>
Restore system settings from tftp server.
• <string> is the configuration file name on the tftp server.
•<xxx.xxx.xxx.xxx> is the IP address of the tftp server.
execute restore image <string>
<xxx.xxx.xxx.xxx>
Restore system images from tftp server.
• <string> is the image file name on the tftp server.
•<xxx.xxx.xxx.xxx> is the IP address of the tftp server.
execute backup config <name_str>
<xxx.xxx.xxx.xxx>
Backup system settings to tftp server.
• <name_str> is the system configuration file name.
•<xxx.xxx.xxx.xxx> is the IP address of the tftp server.
execute reboot Restart the FortiLog system.
execute factoryreset Set the FortiLog system back to factory defaults.
execute save config Save the FortiLog system configuration.
execute shutdown Shut down the FortiLog system.
execute formatlogdisk Format the local log hard disk.